HobbyWireless
RC MICRO CAMERA SWITCH V2
| Dimensions | 24x28mm |
Details:, The new version of rc micro camera switch can toggle between 3 camera now!, Weight: 5g, Note:, in order to oggle between 3 cameras, you will need to either use a channel that can be controlled using a 3-position toggle switch or knob on your RC radio transmitter. Using a 2 position switch will toggle between camera 1 and 3 only.,
Perfect for FPV applications where more one camera can been ...HobbyWireless
AEROSIM RC - FPV SIMULATOR - NEW FEATURES!
Details:, , New released features:, , Note for MAC users:, The MAC version is not supported directly from us. However, many MAC users have reported that AeroSIM RC runs fine in a MAC in several configurations., exclusive features:, - Full FPV support with Camera Pan&Tilt from your Transmitter,,
The first FPV flight simulator allows you to practice to ...HobbyWireless
LOW PASS FILTER FOR 1.2 GHZ - 1.3 GHZ TRANSMITTERS (PROTECTS 2.4 GHZ RC SYSTEM)
Details:,
Low pass filter is a great device to add to ...HobbyWireless
BATTLESWITCH MINI RC SWITCH
| Max relay voltage | 240VAC |
| Max relay current | 10A @ 28VDC, 12A @ 120VAC, 10A @ 240VAC. |
| Relay resistance | 100 mΩ max |
| Dimensions | 1.25" x 1.25" x 0.9" |
| Diagrams | Exemple of diagram |
Details:, BattleSwitch is a relay switch that you toggle via hobby radio control gear. You can use BattleSwitch to quickly and easily control glow plugs, BattleBot weaponry and more. You can activate applications with voltage levels as high as 240VAC without having to know anything about microcontroller logic levels or transistors because the relay offers full electrical isolation from your receiver electronics., Specifications:, , Applications:,
BattleSwitch plugs into a standard hobby radio control receiver as ...HobbyWireless
TSLRS V6 PRO UHF TRANSMITTER - INCREASES THE RANGE OF RC RADIOS
| RF Power output | 0.5W or 1W or 2W. The 2W setting can now be used as long as you like. use selectable |
| Supply Voltage | 6-25V using internal switchmode converter also included inside the nice aluminium |
| Supply current | depends on input voltage, but input power is 3 times RF out power |
| Spurs | < 60dB and 80dB under carrier, improved new double low pass filter |
| Temperature range | -40C to +70C tested |
| Hitech Aurora 9, take out normal RF module and use module pins from left | 1=ppm, 2=supply, 3=GND (4 and 5 are not used) |
Details:, The New PRO version released Feb2012 is a improved version of the V5., Includes:, 1x Transmitter PRO V6 0.5-2W 433Mhz built in regulator,
New radio system, still compatible with older versions rx With ...HobbyWireless
SKY SURFER 2000 KIT
| Material | EPO |
| Wingspan | 2000mm(78.74inch) |
| Flying Weight | 1500g（53oz） |
| 1x Battery | 11.1V ,3S 2600mAh Li-polymer |
| 1x Control system | 4CH Transmitter |
| 1x Motor | Brushless 3536 KV1000 |
| 4x Servo | 17g servos |
| 1x Propeller | 4x9 |
Details:, , Specifications:, , Minimum parts required to fly (not included):,
With a 2 meter wingspan, central wingspar and internal reinforcement, ...HobbyWireless
SKY SURFER 2000 READY TO FLY - RADIO CONTROL INCLUDED
| 1x Material | EPO |
| 1x Wingspan | 2000mm(78.74inch) |
| 1x Flying Weight | 1500g（53oz） |
| 1x Thrust Force：1300g（45.9oz）1x Battery | 11.1V ,3S 2600mAh Li-polymer |
| 1x Control system | 4CH Transmitter |
| 1x Motor | Brushless 3536 KV1000 |
| 4x Servo | 17g servos |
| 1x Propeller | 4x9 |
| 1x Battery | 11.1V ,3S 2600mAh Li-polymer |
| 1x Radio control system | 4CH Transmitter and Receiver |
Details:, , This is the Ready to Fly version:includes esc, motor, servos, remote control, balance charger, and battery. With a 2 meter wingspan, central wingspar and internal reinforcement, the SkySurfer 2000 still has plenty of room for your fpv gear. The sailplane type landing gear allows for takeoffs and landings from hard surfaces. 4 channel control (throttle, elevator, rudder, aileron) allows mixing with an appropriate radio for more positive control., Specifications and contents:, ,
1x Model：Sky-surfer 2000mm 1x ESC：40AHobbyWireless
SKY SURFER-KIT
| Material | EPO |
| Wingspan | 1372mm(54.01inch) |
| Flying Weight | 624g（22oz） |
Details:, , Specifications and contents:, ,
This is the Airframe only version. You will need esc, ...HobbyWireless
SKY SURFER READY TO FLY - RADIO CONTROL INCLUDED
| 1x Material | EPO |
| 1x Wingspan | 1372mm(54.01inch) |
| 1x Flying Weight | 624g（22oz） |
| 1x Control system | 4CH Transmitter |
| 1x Motor | Brushless Outrunner 2620 |
| 4x Servo | 4x 9g high speed servos |
| 1x Battery | 11.1V ,3S 1300mAh Li-polymer |
| 1x Radio control system | 4CH 2.4GhzTransmitter and Receiver |
Details:, , This is the Ready to Fly version:includes esc, motor, servos, remote control, balance charger, and battery. With a 1.4 meter wingspan, central wingspar and internal reinforcement, the SkySurfer still has plenty of room for your fpv gear. The sailplane type landing gear allows for takeoffs and landings from hard surfaces. 4 channel control (throttle, elevator, rudder, aileron) allows mixing with an appropriate radio for more positive control., Specifications and contents:, ,
1x Model：Sky-surfer 1400 mm 1x ESC：20A Brushless Speed ControllerHobbyWireless
SKY SURFER PNP - RADIO CONTROL INCLUDED
| 1x Material | EPO |
| 1x Wingspan | 1372mm(54.01inch) |
| 1x Flying Weight | 624g（22oz） |
| 1x Control system | 4CH Transmitter |
| 1x Motor | Brushless Outrunner 2620 1950kv |
| 4x Servo | 4x 9g high speed servos |
| 1x Battery | 11.1V ,3S 1300mAh Li-polymer |
| 1x Radio control system | 4CH 2.4GhzTransmitter and Receiver |
Details:, , This is the Plug and Play version:includes esc, motor, servos, all you need is your radio control system, balance charger, and battery. With a 1.4 meter wingspan, central wingspar and internal reinforcement, the SkySurfer still has plenty of room for your fpv gear. The sailplane type landing gear allows for takeoffs and landings from hard surfaces. 4 channel control (throttle, elevator, rudder, aileron) allows mixing with an appropriate radio for more positive control., Specifications and contents:, ,
1x Model：Sky-surfer 1400 mm 1x ESC：20A Brushless Speed ControllerHobbyWireless
EASY STAR - READY TO FLY - RC RADIO & ELECTRONICS INCLUDE
| Model Specifications | Wing Length |
| Wing Area | 372 sq. in. |
| Wing Loading | 10.76 oz. | sq. ft. |
| Fuselage Length | 34 in. |
| Motor | Permax Speed 400 6V (Included) |
| Battery | 6 Cell NiMH 1100mAh (Included) |
| Speed Control | X-08 ESC (Included) |
| Weight (English) | 24 oz. |
| Flight Characteristics | Trainer |
| Target User | Beginner |
Details:, The Easy Star was designed for first time pilots in mind, one of the best models for FPV , because it offers incredibly stable flight characteristics and durability. It’s powered by a powerful Permax Speed 400 motor mounted on the top, so hard landings won’t break the prop or hurt the motor. The Easy Star flies with little input and has the ability to recover easily. Made from Multiplex’s durable ELAPOR Foam, the Easy Star will take a tremendous amount of abuse without breaking. When it does break it's easily repaired with CA (super) glue. Even after many crashes, the Easy Star will be ready for more. This is a great plane to teach someone to fly where other trainers would be ready for the trash can!, Ready to Fly Version Includes Everything You Need:, * Hitec Neon SS 72 MHz FM 3 Channel Transmitter,
* No Painting Required, Prefabricated and Colorful Parts made of ...HobbyWireless
TR1012 COMBO SET RECEIVER +TRANSMITTER 1.2GHZ 1000MW - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
| The system can be powered using any DC power source from 10.5 to 13 volts DC example | 3 cells lithium polymer battery works great. |
Details:, Do you want a powerful wireless systems that gives you more than 3 miles of range?, It's perfect for long range applications, (for RC models: it is recommended to install the transmitter as far as possible away from the model's receiver) Even with all this power it only weights around 1oz 30 grams ., Package includes:, -Transmitter 1.2ghz 1000mW with RCA cable for audio and video input., Transmitter Specs:, -1000mW RF output power 1.2GHz frequency band, Receiver Specs:, - Operating voltage from 10.5 to 13 volts DC - 240mA power consumption, Notes:, All transmitters shipped to any addresses within US territory will have only the Channel 8 (1280 MHz) available. In order to use it within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility., Avoid Permanent Damage:, Before applying power to your transmitter and receiver, double check for correct polarity. Also make sure the power source doesn't exceed 13.5 VDC which will not be covered by the warranty.,
Then, this is what you are looking for. This transmitter ...HobbyWireless
FLD-02 TELEMETRY DISPLAY SCREEN
| Specifications | # Model |
| # Compatibility | FrSky DFT, DJT and DHT |
| # Dimension | 55*40*12mm |
| # Pixel | 128*64 |
Details:, The FLD-02 displays in real time all the data remotely transmitter from your RC model via FrSky a duplex receiver., Features:, # Show all connected sensors data;, Note:, Make sure the battery voltage division ratios are programmed in accordance with those of connected battery voltage sensors.,
Very powerful tool to let you know what's going on ...HobbyWireless
HORNET OSD + FY-31AP FLIGHT STABILIZER SYSTEM, GPS AUTO-PILOT FUNCTIONS
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| For FY-21AP | Fixed Altitude flying mode; for FY-3ZT/FY-31AP |
| GPS speed (Unit | km/h) |
| Current latitude and longitude of the plane (Format | “dddmm.mmm” ) |
| The angle of turning to the return point (Unit | deg) |
| Total flight time (Format | “mm.ss”) |
| Course angle of flight (Unit | deg) |
| (Unit | mA / h) |
| Climb rate (Unit | m/s) |
Details:, FY-31AP, By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , • FY-31AP module:, , • GPS module:, , The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , The telemetry data is as below:, , Relative altitude (Unit : m), Operating temperature(Unit: ℃), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes separately are as following:, , The modes are shown as below:,
Attitude Flight Stabilization System (AFSS) 1. Attitude Flight Stabilization System ...HobbyWireless
FY-91Q NAVIGATION EDITION
| System Specifications | FY-91Q Module |
| Mode 3 | Return to Home |
| Mode 1 | Stabilizer Mode |
| Mode 1 | Stabilized Mode |
| Mode 2 | Automated Hover Hold. |
| Mode 3 | Automated Return to Home Mode. |
Details:, FY-91Q flight controller for helicopters, What's Included:, , FY-91Q Navigation Edition contains the following hardware:, • FY-91Q control module x 1;, :, The FY91Q can be installed and flown it the following multi-rotor aircraft:, , :, FY-91Q have been tested to work with the following RC systems:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems, Mode 2:, Automated Hover Hold,
Multi-rotor flight stabilization & Autopilot System • FY91Q RC receiver ...